|
Arctic Cat Roller Action Clutch Kits bolt directly on the
reverse cam Arctic Cat secondary clutch in just minutes. The
hardened steel cam and the steel needle bearing roller
eliminates any sliding friction or flex as found with plastic
rollers working against aluminum cams. The result is ultra quick
backshifting and acceleration which out performs any roller
clutch on the market. The Pre-98 Roller Clutvh Kit consists of
roller cover and hardened steel cam.
|
|
Complete Pre-98 Cover Kit Cam |
Call for up-to-date pricing...Give model and cam
angle
|
|
Spare Parts |
|
Pre-98 Cover |
ACP12709 |
Hardened Steel Cam |
See Chart |
Needle Roller Bearing Pre-98 (ea) |
ACP12640 |
|
Aaen Brown Spring This
secondary clutch spring has an extra heavy torsion rate
and is longer for more initial belt pressure.
|
ITEM# |
AAS12416 |
Call for up-to-date pricing
|
|
The Adjuster
|
|
No longer are stiff springs a problem to install and
racers are able to quickly change tension between heat
races by turning the adjuster plate.
|
The Adjuster |
ACP12708 |
Call for pricing. |
|
|
|
CVT Pro Series Belts
|
|
A unique combination of top cog design, harder
CVT compound and heavy duty Kevlar cords are
matched to a 29 degree belt angle for maximum
grip. We developed this wide belt design for
high performance racing engines that are to
powerful to use regular width production
belts.
|
|
1-3/8" Wide - Rated to 200 HP
|
Please call for up-to-date pricing.
|
|
Polaris (1-3/8 x 47-1/4) |
BEL12589 |
Ski Doo (1-3/8 x 43-3/4) |
BEL12590 |
Arctic Cat (1-3/8 x 47-3/4) |
BEL12591 |
|
1.5" Wide - Rated to 250 HP
|
Please call for up-to-date pricing.
|
|
Polaris (1-1/2 x 47-1/4) |
BEL12586 |
Ski Doo (1-1/2 x 44-1/4) |
BEL12587 |
Arctic Cat (1-1/2 x 47-3/4) |
BEL12588 |
|
1-5/8" Wide - Rated to 300 HP
|
Please call for up-to-date pricing.
|
|
This 1-5/8" drive belt is the only belt
to successfully transfer 300 + HP consistently
and reliably.
|
|
12" C.D. 1-5/8" x 47-1/4
|
BEL12592 |
|
|
|
|
|
|
The new 98-05 short tower kit consist of a hardened steel cam
and three needle bearing steel rollers to replace the plastic
roller in the stock cover.
|
|
Complete 98-UP (cam / rollers) |
Call for up-to-date pricing..(Give model and cam angle)
|
|
CLUTCH CAM and SPRING APPLICATION CHART
|
Model |
Stock |
With Pipes |
|
T Cat 900-1000 |
52 - 48 Aaen Brown |
52-48 / Aaen Brown |
800 ZRT |
52 - 48 Aaen Brown |
52-48 / Aaen Brown |
800 ZR - 900 ZR |
52 - 48 Aaen Green |
52-48 / Aaen Green |
700 ZR - F7 |
52 - 48 Aaen Brown |
52-48 / Aaen Brown |
600 ZRT |
52 - 48 Aaen Brown |
50-46 / Aaen Brown |
600 ZR / ZL - F6 |
48 Stock Yellow |
52-48 / Aaen Brown |
650 - 700 Wildcat |
48 Stock Yellow |
52-48 / Aaen Brown |
580 EXT & ZR |
48 Stock Yellow |
48 Stock Yellow |
|
|
|
HARDENED STEEL CLUTCH CAMS
|
Pre-98 |
44° |
46° |
48° |
50° |
48°-44° |
50°-46° |
|
|
52°-48° |
54°-50° |
56°-40° |
56°-50° |
|
|
98 & Up |
48° |
51° |
50°-46° |
52°-48° |
56°-46° |
|
|
Call for up-to-date pricing
|
|
|
|
|
Top Cog Ultimax 3 Pro Belts
|
|
Model |
Part No. |
|
|
|
POLARIS |
|
|
Indy Trail, XCR 400, XCR, XLT All Thru 99
|
BEL138 4716U3 |
|
Storm, 600, 700 XC, RMK |
BEL144 4824U3 |
|
600 / 700 / 800 XC SO, Pro X, Switchback, RMK
|
BEL144 4640U3 |
|
|
|
YAMAHA |
|
|
1 - 3/8" - Exc., Exc II, PZ II, Mountain Max
|
BEL138 4416U3 |
|
All VMax 600 / 700 & SRX, Vipers, Venom, RX-1
|
BEL138 4432U3 |
|
VMax 4 |
BEL144 5248U3 |
|
|
|
SKI DOO |
|
|
Mach Z, Mach 1, Form SS, 670, '99 Mach 1
|
BEL144 4353U3 |
|
Mach Z, Form III, MXZ 700/800, Summit 700 / 800
|
BEL144 4353U3 |
|
MXZ 580, 583, MXZ Adren., MX Z 500, 600, 550 F / C
|
BEL138 4332U3 |
|
|
|
ARCTIC CAT |
|
|
Z 370, Z 440, Powder Special, ZR 580, 600 ZRT
|
BEL138 4748U3 |
|
KC 900, F 7, ZR 800, Thundercat |
BEL140 4748U3 |
|
|
|
|
|